PolyMide™ CoPA features Polymakers Warp-Free™ technology: Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.

Features

Excellent Toughness - The outstanding mechanical strength and toughness makes PolyMide™ CoPA an excellent choice for engineering based applications.
Excellent heat resistance - With a high softening temperature of ~180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials in the market.
Improved printability – Unlike many Nylon filaments, PolyMide™ CoPA is extremely easy to work with exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required!
Quality Control - With Polymakers eight step quality control process and rigorous in-house testing, you can rest assured that PolyMax™ PC will produce beautiful, reliable and accurate printed parts every time.

We have tested this repeatedly on our Inventor2 Special Edition (cold bed) and found it works best at 240 Degrees extrusion at 70% speed.

Next >

PRINT SETTINGS - Nozzle Temperature: 250°C – 270°C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 25°C – 50°C
- Bed Surface: Glass with glue
- Cooling Fan: OFF
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

MECHANICAL PROPERTIES - Young’s Modulus: 2223 ± 199 Mpa
- Tensile Strength: 66.2 ± 0.9 Mpa
- Bending Strength: 97.0 ± 1.1 Mpa
- Charpy Impact Strength: 9.6 ± 1.4 kJ/m2

THERMAL PROPERTIES - Glass Transition Temperature: 67°C
- Vicat Softening Temperature: 180°C
- Melting Temperature: 190°C

NOTES - Drying Settings: 80°C for 12h
- Recommended Support Materials: PolyDissolve™ S1

Other:
It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.
To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.
Annealing settings: 70°C for 2h



Dimensions: 200Ø x 50mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet

Technical Data Sheet