For more bargains, drop in to our Sydney and Brisbane stores where we have a bargain bin of discontinued, mis-ordered/delivered and seconds parts, consumables and accessories
The Robo R2 high-performance smart 3D printer with Wi-Fi lets you tackle large-scale projects and make whatever you can imagine right from your mobile device using the Robo app
This edition has the Microswiss Upgraded pre fitted and is ready to print materials from PLA through to abrasive materials like carbon fiber.
The 2020 update to a solid large printer adds power-out resumption and an air filter to reduce particle emissions to its user friendly touchsreen and webcam, plus a generaous 280 x 250 x 300mm build volume. Flexable removable bed and spare Bed tape
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
This 2022 update to a solid large 3D printer became much quieter, in addition to a flexible bed And spare bed Tape, Toughend filament drive gear, Toughened nozzle (included in the spare parts pack and not fitted) and improved filter.
It has a user friendly touchsreen and webcam, plus a generous 280 x 250 x 300mm build volume.
All machines come standard with high-temperature extruders (to 300deg).
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
The updated Raise3D E2CF has redesigned extruders and sealed filament boxes specially for the latest Carbon Fibre reinforced materials.
It provides the stability and repeatability of the E2 model, with IDEX - Independant Twin Extruders, and adds the durability of Silicon Carbide nozzles for the most abrasive materials
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
The Raise3D Pro3 is built on the solid foundation of the Pro2 Series.
Improvements include: Clip in/out extruder hotends, Flexible bed system and Chamber air circulation system for even heat distribution throughout the print.
Mid-2023 a Hyper Speed upgrade kit was released, allowing it to print up to 300% faster (sold separately)
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
PLA Blend Filament - 1.75mm - Stainless Steel - 500g Spool - UNTIL SOLD OUT
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.
Printrbot Aluminum direct drive extruder is a work of art. Its elegant design makes it really stand out. Plus it is reversible to accommodate dual extruder setups. It is easy to adjust but rock solid. It holds both the 1.75 Ubis Ceramic and Ubis Catridge hot ends perfectly. Enjoy the benefits of machined aluminum.
* Machined drive gear included. Motor not included
This edition has the Microswiss Upgraded pre fitted and is ready to print materials from PLA through to abrasive materials like carbon fiber.
The 2020 update to a solid large printer adds power-out resumption and an air filter to reduce particle emissions to its user friendly touchsreen and webcam, plus a generaous 280 x 250 x 300mm build volume. Flexable removable bed and spare Bed tape
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
This 2022 update to a solid large 3D printer became much quieter, in addition to a flexible bed And spare bed Tape, Toughend filament drive gear, Toughened nozzle (included in the spare parts pack and not fitted) and improved filter.
It has a user friendly touchsreen and webcam, plus a generous 280 x 250 x 300mm build volume.
All machines come standard with high-temperature extruders (to 300deg).
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
The Einstar is designed to easily capture stable and clear details at a fast pace with high quality data
outputs. Start 3D scanning at ease today with
Einstar
Printrbot Aluminum direct drive extruder is a work of art. Its elegant design makes it really stand out. Plus it is reversible to accommodate dual extruder setups. It is easy to adjust but rock solid. It holds both the 1.75 Ubis Ceramic and Ubis Catridge hot ends perfectly. Enjoy the benefits of machined aluminum.
* Machined drive gear included. Motor not included
Kimya HIPS-R - 1.75mm - Natural (Grey)- 500g - UNTIL SOLD OUT
50% off to clear stock!
Kimya HIPS (High Impact Polystyrene) is a technical, lightweight and durable thermoplastic. It offers an esthetic and robust finish, without deformation.
Can also be used as a support material for ABS which can be dissolved in Limonene oil
Matte Fiber HTPLA - 2.85mm - Blue - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - Red - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - White - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.
PLA Blend Filament - 1.75mm - Stainless Steel - 500g Spool - UNTIL SOLD OUT
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.
HTPLA - 1.75mm - Copper - 50g Coil - UNTIL SOLD OUT
Terracotta or cast copper? Brush, polish, or patina and enjoy!
Introducing Copper Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Brass - 500g Spool - UNTIL SOLD OUT
Brick or cast brass? Brush, polish, or patina and enjoy!
Introducing Brass Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Bronze - 500g Spool - UNTIL SOLD OUT
Brick or cast bronze? Brush, polish, or patina and enjoy!
Introducing Bronze Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Bronze - 50g Coil - UNTIL SOLD OUT
Brick or cast bronze? Brush, polish, or patina and enjoy!
Introducing Bronze Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
PLA Blend Filament - 1.75mm - Stainless Steel - 500g Spool - UNTIL SOLD OUT
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PLA Blend Filament - 1.75mm - Stainless Steel - 500g Spool - UNTIL SOLD OUT
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - Blue - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - Red - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - White - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
HTPLA - 1.75mm - Copper - 50g Coil - UNTIL SOLD OUT
Terracotta or cast copper? Brush, polish, or patina and enjoy!
Introducing Copper Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Brass - 500g Spool - UNTIL SOLD OUT
Brick or cast brass? Brush, polish, or patina and enjoy!
Introducing Brass Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Bronze - 500g Spool - UNTIL SOLD OUT
Brick or cast bronze? Brush, polish, or patina and enjoy!
Introducing Bronze Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
HTPLA - 1.75mm - Bronze - 50g Coil - UNTIL SOLD OUT
Brick or cast bronze? Brush, polish, or patina and enjoy!
Introducing Bronze Composite HTPLA. Prints like plastic, but finishes like real metal for beautiful, durable parts from most standard 3D printers. So many finishing possibilities, but here are some ideas to get you started (see sample Protognomes in product photos):
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
The updated Raise3D E2CF has redesigned extruders and sealed filament boxes specially for the latest Carbon Fibre reinforced materials.
It provides the stability and repeatability of the E2 model, with IDEX - Independant Twin Extruders, and adds the durability of Silicon Carbide nozzles for the most abrasive materials
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
The Raise3D Pro3 is built on the solid foundation of the Pro2 Series.
Improvements include: Clip in/out extruder hotends, Flexible bed system and Chamber air circulation system for even heat distribution throughout the print.
Mid-2023 a Hyper Speed upgrade kit was released, allowing it to print up to 300% faster (sold separately)
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
The Robo R2 high-performance smart 3D printer with Wi-Fi lets you tackle large-scale projects and make whatever you can imagine right from your mobile device using the Robo app
The Mayku FormBox Vacuum Thermoformer makes molds in seconds, speeding up your product development cycle.
Bringing your next idea to life has never been easier.
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
Matte Fiber HTPLA - 2.85mm - Blue - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - Red - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
Matte Fiber HTPLA - 2.85mm - White - 500g Spool - UNTIL SOLD OUT
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle.
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Kimya HIPS-R - 1.75mm - Natural (Grey)- 500g - UNTIL SOLD OUT
50% off to clear stock!
Kimya HIPS (High Impact Polystyrene) is a technical, lightweight and durable thermoplastic. It offers an esthetic and robust finish, without deformation.
Can also be used as a support material for ABS which can be dissolved in Limonene oil
Kimya HIPS-R - 1.75mm - Natural (Grey)- 500g - UNTIL SOLD OUT
50% off to clear stock!
Kimya HIPS (High Impact Polystyrene) is a technical, lightweight and durable thermoplastic. It offers an esthetic and robust finish, without deformation.
Can also be used as a support material for ABS which can be dissolved in Limonene oil
The Raise3D Pro3 is built on the solid foundation of the Pro2 Series.
Improvements include: Clip in/out extruder hotends, Flexible bed system and Chamber air circulation system for even heat distribution throughout the print.
Mid-2023 a Hyper Speed upgrade kit was released, allowing it to print up to 300% faster (sold separately)
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply