B3D Tape for Raise3D N2 / Pro2 Series - 340 x 330mm - by BuildTak
Custom printed for Bilby3D by BuildTak in the USA, this tape fit not just the Raise3D N2 and Pro2 series, but also many other printer of this size More
BOX of 3DLac PLUS Bed Spray - 100ml Spray Bottle - Box of 12
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss. More
Nano Polymer Adhesive is the ideal bed prep for eliminating lift and warp with PEEK, PEKK, Ultem PEI, PPSU, ABS, ASA, PLA, PETG, NYLON, PC, and many more. More
With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed! More
BuildTak PEI Bed Tape for Raise Pro2, N2 - 332x340mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints More
Please note: The signal line only supports the 3D touch sensor produced by trianglelab. We are not sure if the sensors of other merchants are compatible. We are also not sure if BL TOUCH is compatible. Please confirm that your sensor was manufactured by TriangleLab before purchasing. More
BuildTak Nylon+ Tape for Raise3D N2 / Pro2 Series - 340 x 330mm
Manufactured in the USA to ensure consistent quality and composition, BuildTak Nyon+ build surfaces come with the no-cleanup BuildTak Original adhesive. More
BuildTak FlexiPlate System for FlashForge Creator Pro or Pro2 IDEX
BuildTak is dedicated to making the 3D printing experience as easy as possible, this three-part system was developed specifically to eliminate the hassle of print removal More
BuildTak PEI Bed Tape for Guider2 Series - 260x305mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
B3D Tape for Raise3D N2 / Pro2 Series - 340 x 330mm - Pack of 5
Custom printed for Bilby3D by BuildTak in the USA, this tape fit not just the Raise3D N2 and Pro2 series, but also many other printer of this size More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
BuildTak PEI Bed Tape for FlashForge Creator Pro / Dreamer - 235x235mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints More
Rapid Tac - Cleaner and Application Fluid. 4oz / 110g spray bottle
Use with paper towel (no cloths) to clean your bed and apply bed tape easily, without any bubbles.
The bottle says: For wet application of decals, graphics and film. Formulated for premium, cast film applications in all climates
This longer version of the popular BuildTak Spatula is designed for getting those larger prints off the bed!
The BuildTak Spatula is a removal tool designed and developed specifically for 3D Printing. No more using a tool adapted from some other purpose. This awesome new tool features a stainless steel blade with a thin yet rigid front edge for getting under prints. The handle is ergonomic and uses a non-slip rubber grip. More
BuildTak Spare Flex Plate for FlastForge Deamer & Creator Pro
***PLEASE NOTE: THIS IS AN ADDITIONAL FLEXPLATE AND REQUIRES A MAGNETIC MOUNTING BASE & BUILDTAK SHEET (included in the Complete BuildTak FlexPlate System). It does not come packaged with any surface. *** More
BuildTak Nylon+ Tape for FlashForge Dreamer / Creator - 235 x 159mm
Manufactured in the USA to ensure consistent quality and composition, BuildTak Nyon+ build surfaces come with the no-cleanup BuildTak Original adhesive. More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
BuildTak FlexiPlate System for Raise N2 + Pro2 Series
BuildTak is proud to announce the latest addition to their line of 3D printing accessories – the BuildTak FlexPlate System!
As a company dedicated to making the 3D printing experience as easy as possible, this three-part system was developed specifically to eliminate the hassle of print removal
Note there are V1 and V2 versions- V2 has Tabs at the front
V1 Plates are dificult to remove with V2 Magnet sheet,br/> More
BuildTak FlexiPlate System for FlashForge Guider 2 / 2S
BuildTak is proud to announce the latest addition to their line of 3D printing accessories – the BuildTak FlexPlate System!
As a company dedicated to making the 3D printing experience as easy as possible, this three-part system was developed specifically to eliminate the hassle of print removal More
BuildTak PEI Bed Tape 500x500mm - Creality CR-10 S5
BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints.
This size fits the CR-10 S5 bed. It can be easily trimmed to size/shape wth a knife or scissors More
3DLAC STICK is an adhesive specially designed to fix the FFF/FDM 3D parts during the whole printing process and its formula helps to prevent possible errors such as warping. More
This die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 X 16cm. The backing peals off for easy adhesion. Price is per sheet (also available in bulk packs)
We manufacture this tape to have a strong adhesive and be better for PLA adhesion than painters tape, or Makerbot blue tape sheets More
100x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 100 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion. More
25x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion. More
Bulk Pack Blue Tape Precut Sheet - 15x15cm - Pack of 25 sheets
This is a 25 sheet pack of our die cut self adhesive Blue tape designed to fit a 15 X 15cm bed, like the XYZ Jnr, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 15 X 15cm. The backing peels off for easy adhesion. More
25x Bulk Pack Blue Tape Precut Sheet - 25x19cm - Replicator 5th Gen
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit the Makerbot Replicator5th Gen 25 x 19cm bed, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 25 x 19cm. The backing peels off for easy adhesion. More
This flexible sheet forms part of the full FlexPlate System., Ie: it is a spare plate, and does not include the tape
Sized for the Raise N2 series
Note there are V1 and V2 versions- V2 has Tabs at the front
V1 Plates are dificult to remove with V2 Magnet sheet,br/> More
Single spare PEI sheet at size of 1075x355mm covering a THIRD of the BIG-Meter bed plate. Please order 3 pcs in order to cover the entire bed plate. More
3D printing Tape (Blue Edgelock) - 48mm wide x 50m long
This blue painters (masking) tape is widely accepted as the standard for covering your bed for printing with PLA.
One roll will completely re-cover a Replicator bed over 50 times, or a prusa bed over 43 times.
Genuine 3M Edge-Lock tape More
This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases easily when cold. More
This Polyimide (also known as Kapton) Tape is extra wide (100mm), great for covering your build platform when printing with ABS. The roll is approx 33m long and Kapton is approx 0.02mm thick More
Dreamer / Inventor / CreatorPro Blue Print Bed Tape, 23x15cm
This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed.
It is very similar to BuildTak but with more texture on the surface
This is a genuine FlashForge replacement sheet for the FlashForge Guider2 printing bed.
It is similar to BuildTak, but with more surface texture, and can be cut down with scissors or a knife and used on other machines with a differently sized bed More
This is a genuine FlashForge replacement part for the FlashForge Finder
It clips in and out of the plastic holder which slides in and out of the machine to remove prints More
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
Perth - Belmont, WA
3D Printers
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs