Prices + Stock updated 10 May @ 13:42
3DLAC STICK is an adhesive specially designed to fix the FFF/FDM 3D parts during the whole printing process and its formula helps to prevent possible errors such as warping.
Note: This is the only 3DLac product that is not Dangerous goods - so it CAN be sent Express / Air-Freight
3DLAC STICK can be applied on multiple surfaces on which you want to print with 3D printers. Depending on each material, different adherences will be achieved, so we advise you to do previous tests before printing with certain technical materials.
When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch.
Directions for use
• 01 CLEAN_ Ensure that the printing surface is clean and free from debris
• 02 SHAKE_ Shake the bottle very well before use
• 03 PRESS_ Gently press the bottle against the printing surface to activate the adhesive
• 04 SPREAD_ Apply the adhesive onto the printing surface evenly. You can create parallel lines or zigzags according to your preference. Make sure to cover the entire area where you want the print to adhere
• 05 PRINT_ Begin the print job, confident in the reliable adhesion provided by 3DLAC Stick
• 06 REMOVE_ Once the print is finished and the surface has cooled, easily remove your printed object
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
3DLac PLUS Bed Spray - 100ml Spray Bottle
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Buy Now
Vision Miner Bed Prep Polymer Adhesive - 120ml
Nano Polymer Adhesive is the ideal bed prep for eliminating lift and warp with PEEK, PEKK, Ultem PEI, PPSU, ABS, ASA, PLA, PETG, NYLON, PC, and many more.
Buy Now
3DLac Bed Spray - 400ml Aerosol Can
The original aerosol version of 3D Lac
Buy Now
BOX of 3DLac PLUS Bed Spray - 100ml Spray Bottle - Box of 12
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Copyright 2011-2024 Bilby3D Pty. Ltd.