Prices + Stock updated 19 Nov @ 15:27
With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed!
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
3D Lac PLUS Bed Spray - 100ml Spray Bottle
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Buy Now
Plastic Scraper with soft edge
This plastic scraper is ideal for smoothing tape onto your priter bed, and helping to remove prints and waste from your bed. One edge is sharp, the other has a soft fabric glued on (similar to loop velcro)
Buy Now
BuildTak Spatula - Long Version
This longer version of the popular BuildTak Spatula is designed for getting those larger prints off the bed!
The BuildTak Spatula is a removal tool designed and developed specifically for 3D Printing. No more using a tool adapted from some other purpose. This awesome new tool features a stainless steel blade with a thin yet rigid front edge for getting under prints. The handle is ergonomic and uses a non-slip rubber grip.
Buy Now
Tool kit for Flashforge 3D Printers
This tool kit is specifically designed for Flashforge printers, with all tools you need for repair and maintain of your machines
Buy Now
Modix3D PEI Tape - 1075x355mm
Single spare PEI sheet at size of 1075x355mm covering a THIRD of the BIG-Meter bed plate. Please order 3 pcs in order to cover the entire bed plate.
Buy Now
25x Bulk Pack Blue Tape Precut Sheet - 25x19cm - Replicator 5th Gen
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit the Makerbot Replicator5th Gen 25 x 19cm bed, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 25 x 19cm. The backing peels off for easy adhesion.
Buy Now
BuildTak (Replicator 2), 28x15cm
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
Buy Now
Modix3D PEI Tape - 660x660mm
Modix Genuine Spare Part - covers the whole bed on the Big60 and 120Z, but you will need 2 pieces for the 120X
Buy Now
Finder Blue Print Bed Tape, 15x15cm
This is a genuine FlashForge replacement sheet for the Finder printing bed.
Buy Now
25x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion.
Buy Now
100x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 100 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion.
Buy Now
Bulk Pack Blue Tape Precut Sheet - 15x15cm - Pack of 25 sheets
This is a 25 sheet pack of our die cut self adhesive Blue tape designed to fit a 15 X 15cm bed, like the XYZ Jnr, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 15 X 15cm. The backing peels off for easy adhesion.
Buy Now
Ceramic tape with Kapton for Finder, Inventor2, Guider2 - UNTIL SOLD OUT
Suits the Finder, Inventor2, Inventor2s, Inventor2SE, Guider, Guider2 and Guider2s machines as well as many others. It is not self adhesive and you need Kapton tape to attach to the heater block.
Buy Now
Pre-Cut Ceramic tape with Kapton - UNTIL SOLD OUT
Suits the Creator Pro, Dreamer and Inventor machines as well as a wealth of others. It is not self adhesive and you need Kapton tape to attach to your heat block.
Buy Now
Blue Tape Precut Sheet (for Replicator 1,2,2X)
This die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 X 16cm. The backing peals off for easy adhesion. Price is per sheet (also available in bulk packs)
We manufacture this tape to have a strong adhesive and be better for PLA adhesion than painters tape, or Makerbot blue tape sheets
Buy Now
Vinyl Bed Tape - Textured 285x165mm
This precut sheet of textured tape is 285x165mm to fit a Makerbot Replicator2 print bed. The texture means that your printout locks on to the bed much more strongly than using masking tape
Buy Now
3D printing Tape (Blue Edgelock) - 48mm wide x 50m long
This blue painters (masking) tape is widely accepted as the standard for covering your bed for printing with PLA.
One roll will completely re-cover a Replicator bed over 50 times, or a prusa bed over 43 times.
Genuine 3M Edge-Lock tape
Buy Now
BuildTak Print Bed Tape 40x40 cm
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
Buy Now
Ceramic Insulation Tape
This 1 inch wide ceramic tape is used to wrap your heater block and reduce heat transfer to both the extruder and your work piece. Fix by wrapping in kapton tape.
The tape on your Reprap will need replacing from time to time, especially when a print fails and the melted plastic gets caught up in the print head - it can sometimes stick to the ceramic tape and rip it on removal - careful not to pull on the temperature sensor wire!
Buy Now
Side Cutter - 110mm
Precision Sidecutters for cutting wire, leads etc.
Buy Now
Needle Nosed Pliers
130mm long needle nosed pliers.
Buy Now
FlashForge Creator Pro2 with IDEX
This update to the venerable Creator Pro adds twin independant Extruders for clean dual extrusion, mirror printing and duplication printing of 2 parts at the same time.
Buy Now
BuildTak PEI Bed Tape for Guider2 Series - 260x305mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints
Buy Now
Nozzle Clearing Tool
This hand held tool is a safer way to clear blockages in your nozzle
Buy Now
BuildTak (Replicator 5th Gen), 25x20cm
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
Buy Now
BuildTak PEI Bed Tape for FlashForge Creator Pro / Dreamer - 235x235mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints
Buy Now
FlashForge Guider 2-S with MicroSwiss Hot End
This edition has the Microswiss Upgraded pre fitted and is ready to print materials from PLA through to abrasive materials like carbon fiber.
The 2020 update to a solid large printer adds power-out resumption and an air filter to reduce particle emissions to its user friendly touchsreen and webcam, plus a generaous 280 x 250 x 300mm build volume. Flexable removable bed and spare Bed tape
Buy Now
BOX of 3D Lac PLUS Bed Spray - 100ml Spray Bottle - Box of 12
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Buy Now
BuildTak PEI Bed Tape for Raise Pro2, N2 - 332x340mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints
Buy Now
FlashForge Guider 2-S (v2 - 2022 Model)
This 2022 update to a solid large 3D printer became much quieter, in addition to a flexible bed And spare bed Tape, Toughend filament drive gear, Toughened nozzle (included in the spare parts pack and not fitted) and improved filter.
It has a user friendly touchsreen and webcam, plus a generous 280 x 250 x 300mm build volume.
All machines come standard with high-temperature extruders (to 300deg).
Buy Now
Tool for Clearing Extruder Jams (in barrel or feeder)
This tool kit is specifically designed to be inserted into your 3D Printer feeder to push down any broken material and assist in clearing blockages in the barrel and or feeder.
Buy Now
Inventor 2+ Blue Print Bed Tape, 16x15cm
This is a genuine FlashForge replacement sheet for the Inventor 2 / 2S and 2SE printing bed.
Buy Now
BuildTak Bed Tape for Raise3D Pro2, N2-S, N2, N2 Plus
This is the original tape fitted to your Raise 3D print bed
Size: 332 x 340mm
Buy Now
Extruder Clearing Bow Tool
Handy tool for pushing jammed filament in to your extruder
Buy Now
Dreamer / Inventor / CreatorPro Blue Print Bed Tape, 23x15cm
This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed.
It is very similar to BuildTak but with more texture on the surface
Buy Now
Guider 2 Blue Print Bed Tape 30x26cm
This is a genuine FlashForge replacement sheet for the FlashForge Guider2 printing bed.
It is similar to BuildTak, but with more surface texture, and can be cut down with scissors or a knife and used on other machines with a differently sized bed
Copyright 2011-2023 Bilby3D Pty. Ltd.
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
Perth - Belmont, WA
3D Printers
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs