Zetamix H13 Tool Steel has the big advantage that is does not require tricky debinding in acetone or nitirc acid - the binder is simply burnt out in the furnace at a lower temperature for a time, before ramping up to sintering temperature.

H13 steel

This steel is commonly used for hot or cold work tooling application and allows the production of a wide variety of tools such as extrusion die or injection mold. Moreover this material has a high level of ductility, thermal and electrical conductivity and resistance to corrosion.

Advantages

- Density of more than 90%
- Suitable for internal tooling
- High temperature resistant
- Excellent ductility

Disadvantages

All metal sintering filaments shrink and slump during sintering. Therefore:
- Supports should be left on during sintering, and must be revomed once fully metal (cutting or grinding)
- Allowances mut be made for shrinkage during sintering. This will depend on the part shape, but can be generalised by oversizing 119.7% in the X+Y, 120.5% in the Z direction
- See support tab for more information and guides

Next > More Information

Characteristics

- Printing temperature: 180°
- Bed Temperature: 30 °C - Sintering process: From 20 °C to 500°C at 10°C/ then Up to 1350°C at 50°C/h, holding time 2h in argon or nitrogen atmosphere
- Spools delivered vacuum packed




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet

Technical Data Sheet