Prices + Stock updated 10 May @ 13:42
Aluminium Heater Block 20x20x10mm &plusmin;1mm.
This aluminium heaterblock is used on MK8 extruders - those with a M6 threaded nozzle and barrel/heatbreak. It has a 6mm hole with grub screw for the heater cartridge and a M3 threaded hole for a thermisitor, which can also be used with the button head screw (supplied) to hold a glass bead thermistor in place
Next >
- M3 hole for thermistor or thermocoupler, now with side hole for helping to hold glass-bead type thermistors.
- M6 threaded barrel/nozzle fitting hole
- 6mm main hole for a metric heater cartridge with grub screw
Dimensions: 19x19x10mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
0.4mm Nozzle - M6 Thread for MK8 Extruders - Brass
This is the most common nozzle across all 3D Printers. Most notably Makerbot Replicator 1, 2 and 2x, Prusa, older FlashForge
Buy Now
Heater Cartridge - 40W 24V
This ceramic core heater cartridge has a variety of heating possibilities from hot ends/ extruders to heated beds.
Buy Now
Stainless Steel Barrel (aka thermal barrier or Heat core)
Stainless Steel Barrel.(aka Throat, Heatbreak)
Connects the heater block to the extruder mounting block or heatsink
Buy Now
Pre-Cut Ceramic tape with Kapton - UNTIL SOLD OUT
Suits the Creator Pro, Dreamer and Inventor machines as well as a wealth of others. It is not self adhesive and you need Kapton tape to attach to your heat block.
Buy Now
Ceramic Insulation Tape
This 1 inch wide ceramic tape is used to wrap your heater block and reduce heat transfer to both the extruder and your work piece. Fix by wrapping in kapton tape.
The tape on your Reprap will need replacing from time to time, especially when a print fails and the melted plastic gets caught up in the print head - it can sometimes stick to the ceramic tape and rip it on removal - careful not to pull on the temperature sensor wire!
Buy Now
All Metal Hotend Kit for CR-6 SE Printers
All Metal Hotend Kit for Creality CR-6 SE Printers
Buy Now
All Metal Hotend Kit for CR-10 Printers
All Metal Hotend Kit for CR-10 Printers
Includes a silicon heat block cover (not shown)
Buy Now
All Metal Hotend Kit for CR-10s PRO Printers
All Metal Hotend Kit for Creality CR-10s PRO / CR-10 Max / Ender 3 Neo / Ender 3 V2 Neo
Buy Now
Silicon Sock - Heater Block Cover for MK8 Extruders
This silicon cover is designed for standard heater blocks - 20x20x10mm
Copyright 2011-2024 Bilby3D Pty. Ltd.
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
Perth - Belmont, WA
3D Printers
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs