Prices + Stock updated 19 Nov @ 15:27
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
This Micro Swiss Plated Wear Resistant Nozzle for Volcano Hotend 1.75mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
To suit:
- E3D Volcano HotEnd for 1.75mm Filament
- Artillery Sidewinder X1
- Tevo Little Monster
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
0.4mm Nozzle - M6 Thread for Volcano Hotend - Twin Clad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
0.8mm Nozzle - M6 Thread for Volcano Hotend - TwinClad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
1.0mm Nozzle - M6 Thread for Volcano Hotend - TwinClad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
Hot End - Volcano Clone - 1.75mm filament, 0.6mm nozzle, 24V
Volcano compatible all metal hotend
Copyright 2011-2023 Bilby3D Pty. Ltd.
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
Perth - Belmont, WA
3D Printers
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs