1. Abrasion resistance
2. High-Temperature resistance
3. Low friction coefficient as 0.03 with WS2 Coating - Restrains filament accumulation 4. Stable chemical properties - non-toxic, non-corrosive and insoluble
5. Good lubrication and anti-abrasive performance under the highest temperature at 450 °C
6. Ultra low thrust for filament fluidity

In addition to being suitable for normal filaments, the nozzle is also especially suitable for those composite filaments with abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten, phosphorescent pigment, etc., and those high-temperature-resistant filaments such as PEEK, PEKK, PEI, PSU, PPSU

Next >

- Mohs Hardness: 7.8
- Max. Print Temp: 450°C
- Coefficient of Heat Conductivity: 26W/m.k
- CTE: 12µm/m. °C


Dimensions: 35x35x18


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product