Kimya ABS-EC is a thermoplastic based on ABS, one of the most common polymers on the additive manufacturing market.
ABS is produced by the co-polymerization of three co-monomers: acrylonitrile, styrene and butadiene. ABS was one of the first materials to be used in industrial applications, due to its resistance to impact, heat and ageing. Moreover, it provides a good degree of rigidity and robustness. Printing an ABS filament requires close control of its build plate temperature because the thermoplastic peels off more easily, but also ensuring that it shrinks on cooling.

Next > More Information

Filament Properties

Property	Test Method	Result
Diameter	INS-6713	1.75 ± 0.05 mm 2.85 ± 0.05 mm
Density	ISO 1183-1	1.035 g/cm3
Moisture rate	INS-6711	< 0.5 %
Melt flow index (MFI)	ISO 1133-1 (@260°c – 10 kg)	8 - 16 g/10min
Glass transition temperature (Tg)	ISO 11357-1 DSC (10°C/min - 20-300°C)	108 °C

Recommended Print Parameters

Printing Direction	XY
Printing Speed	45 mm/s
Infill	100% - rectilinear
Infill Angle	45°/-45°
Nozzle Temperature	260°C
Bed T°	95°C

Printed Specimin Properties

Property	Test Method	Result
Electrical Properties	Surface resistivity	ASTM D257	< 106 Ohms/m²
Mechanical Properties	Tensile modulus	ISO 527-2/5A/50	2.398 MPa
	Tensile Strength	ISO 527-2/1A/50	36.7 MPa
	Tensile strain at strength	ISO 527-2/1A/50	2.3 %
	Tensile Stress at Break	ISO 527-2/5A/50	29.2 MPa
	Tensile strain at break	ISO 527-2/5A/50	5.2 %
	Flexural modulus	ISO 178	1.393 MPa
	Flexural stress at conventional deflection (3,5% strain)*	ISO 178	49.3 MPa
	Flexural strain at flexural strength	ISO 178	>5 %
	Charpy impact resistance	ISO 179-1/1eA	27.6 kJ/m²
	Shore Hardness	ISO 868	67.2

Note 1	*According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2	The data should be considered as indicative values - Properties can be influenced by production conditions.

Dimensions: 200mm dia. 55wide


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Technical Data Sheet