With Intelligent microcomputer control, touch control panel operation and LCD panel display, this glass doored metal cabinet is for storing and using filament sensitive to humidity straight from the controlled environment through the ports in the top of the unit.
This is especially important for PVA and Nylon blends

Internal Dimensions: 58 x 47 x 89cm (W x D x H)

External Dimensions: 59 x 50 x 97cm (W x D x H)



Next >

Internal Dimensions: 39.5 x 40 x 57cm (W x D x H)
External Dimensions: 40 x 41 x 65cm (W x D x H)
Humidity adjustable between 25 and 60% Relative Humidity
1 internal cross bar to mount your spools
Capacity: Aprox. 90 Litres
Power Consumption: 7 W / hour

Dimensions: 40 x 41 x 65cm


Next >

Dry cabinets make such a massive difference to the performance of your filament. Here are some guides for you to get the most of each material:

- PLA/ABS/PETG likes to be stored at 35-45% humidity. Wet filament will take about 4 hrs to dry

- PVA needs <10% (as with all water solubles) Once wet it is very difficult to repair as it may have started to dissolve

-Nylon 20% and takes much longer to dry than other materials, up to 2 days

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.