Flame Retardant - V0 performance in the UL94 flame retardancy test, PolyMax™ PC-FR benefits applications where respective material approval is required.

Fantastic Toughness - An excellent choice for engineering applications, Polymaker has introduced its nano reinforcement technology that is featured in all PolyMax™ materials. This boosts the fracture toughness of the FR material and produces a flame-retardant filament that can still perform in demanding applications.

Heat Resistant - PolyMax™ PC-FR offers better heat resistance than a wide variety of material types, withstanding temperatures well above 110 ºC.

Improved Printability - PolyMax™ PC-FR has been engineered specifically with compatibility and usability in mind. PolyMax™ PC-FR not only offers excellent properties and print quality, but also improved printability when compared to other PC filaments. Enclosure and 90°C heated bed required; a heated chamber is highly recommended.

Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.



Next >

Print Settings

- Nozzle Temperature: 250°C – 270°C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 90°C – 105°C
- Chamber Temperature: 90°C – 100°C
- Bed Surface: Almost any surface with glue
- Cooling Fan: OFF
Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters.

Mechanical Properties

- Young’s Modulus: 2634 ± 182 (MPa)
- Tensile Strength: 67 ± 4.5 (MPa)
- Bending Strength: 96.6 ± 1.3 (MPa)
- Impact Strength: 11.7 ± 1.3 (kJ/m2)

Thermal Properties

- Glass Transition Temperature: N/A
- Vicat Softening Temperature: 116°C
- Melting Temperature: N/A

Notes

Recommended Support Materials: PolyDissolve™ S2
Other: When printing with PolyMax™ PC-FR it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress when not using a heated chamber.

Annealing settings: 100°C for 2h

The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

Dimensions: 200 x 200 x65 mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product