Prices + Stock updated 24 Apr @ 16:30
Raise3D Industrial PA12 CF Filament is a carbon fiber-reinforced composite filament material based on Nylon 12 (Polyamide 12)
Thanks to being reinforced with short carbon fibers, it exhibits excellent rigidity and strength, heat resistance, low warpage, and low water absorption. Meanwhile, this material has an outstanding strength-to-weight ratio, which makes it suitable to replace metal in the manufacturing of certain lightweight components.
Next >
More Information
Related Products:
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 750g
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Buy Now
Raise3D Industrial PA12 CF - 1.75mm - Black - 1kg Spool - UNTIL SOLD OUT
Raise3D Industrial PA12 CF Filament is a carbon fiber-reinforced composite filament material based on Nylon 12 (Polyamide 12)
Buy Now
Raise3D Industrial PA12 CF SUPPORT - 1.75mm - Pink - 1kg Spool
Raise 3D Raise3D Industrial PA12 CF Support Filament is a break-away support material specially developed for carbon fiber-reinforced composite materials.
Buy Now
PolyMaker Carbon Fibre Reinforced PA6+12 Nylon, 1.75mm, 500g
PolyMide™ PA612-CF is a carbon fiber reinforced nylon filament based on a copolymer of Nylon 6 and Nylon 12. Featuring 15% chopped carbon fibers by weight, this filament has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials.
Buy Now
PolyMaker Carbon Fibre reinforced PA6 Nylon, Black, 1.75mm, 500g
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Copyright 2011-2024 Bilby3D Pty. Ltd.