B3D - Kimya ABS Conductive - 2.85mm Black - 500g

X Close

General Enquiries:

Phone: Freecall 1800-847-333

Sydney - Kingsgrove, NSW
More

Unit 7, "Kingsgrove Business Centre"

Set Your Store

192 Kingsgrove Rd
Ph: 02 8197 3928

Melbourne - Clayton, VIC

Factory A5, "Hallmarc Business Park" 2 Westall Rd

Set Your Store

Ph: 03 8080 1200

Perth - Belmont, WA

Unit 3, 158 Francisco St (cnr of Abernethy Rd)

Set Your Store

Ph: 08 9334 5222

Click above to set your Store

Bilby 3D Services

Bilby 3D Technical Support 3D Printer Repair

3D Printer Service and Repair 3D Printer Repair

Courses and Training

X Close

Materials / Filament

...More

----------- Branded Filament --------------

Matter & Form Scanner V2

Matter and Form V2 Scanner + QuickScan Software

$1450.00

X Close

3D Scanners

Wear Resistant Nozzles

Last longer (especially for abrasive filament types) AND increase print quality

X Close

Parts and Spares

----- Machine Specific Spares -------

...More

THE 3D Printing Spatula

$39.95

X Close

Kimya ABS-EC filament is ABS-based with the main features being electrical conductivity and good thermal resistance.
It possesses the same characteristics as our Kimya ABS-ESD filament, with the exception of its surface resistivity, i.e. its ability to oppose the flow of an electric current. This is lower than in Kimya ABS-ESD. Thus, it allows electrons to circulate more rapidly, as in metals.

Kimya ABS-EC is a thermoplastic based on ABS, one of the most common polymers on the additive manufacturing market.
ABS is produced by the co-polymerization of three co-monomers: acrylonitrile, styrene and butadiene. ABS was one of the first materials to be used in industrial applications, due to its resistance to impact, heat and ageing. Moreover, it provides a good degree of rigidity and robustness. Printing an ABS filament requires close control of its build plate temperature because the thermoplastic peels off more easily, but also ensuring that it shrinks on cooling.

Next > More Information

Filament Properties

Property	Test Method	Result
Diameter	INS-6713	1.75 ± 0.05 mm 2.85 ± 0.05 mm
Density	ISO 1183-1	1.035 g/cm3
Moisture rate	INS-6711	< 0.5 %
Melt flow index (MFI)	ISO 1133-1 (@260°c – 10 kg)	8 - 16 g/10min
Glass transition temperature (Tg)	ISO 11357-1 DSC (10°C/min - 20-300°C)	108 °C

Recommended Print Parameters

Printing Direction	XY
Printing Speed	45 mm/s
Infill	100% - rectilinear
Infill Angle	45°/-45°
Nozzle Temperature	260°C
Bed T°	95°C

Printed Specimin Properties

Property	Test Method	Result
Electrical Properties	Surface resistivity	ASTM D257	< 10⁶ Ohms/m²
Mechanical Properties	Tensile modulus	ISO 527-2/5A/50	2.398 MPa
	Tensile Strength	ISO 527-2/1A/50	36.7 MPa
	Tensile strain at strength	ISO 527-2/1A/50	2.3 %
	Tensile Stress at Break	ISO 527-2/5A/50	29.2 MPa
	Tensile strain at break	ISO 527-2/5A/50	5.2 %
	Flexural modulus	ISO 178	1.393 MPa
	Flexural stress at conventional deflection (3,5% strain)*	ISO 178	49.3 MPa
	Flexural strain at flexural strength	ISO 178	>5 %
	Charpy impact resistance	ISO 179-1/1eA	27.6 kJ/m²
	Shore Hardness	ISO 868	67.2

Note 1	*According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2	The data should be considered as indicative values - Properties can be influenced by production conditions.

Dimensions: 200mm dia. 55wide

Next >

General Enquiries:

Sydney - Kingsgrove, NSW
More

Melbourne - Clayton, VIC

Perth - Belmont, WA

Log In to your Account

Login

New to Bilby3D?

Bilby 3D Technical Support

3D Printer Service and Repair