Prices + Stock updated 10 May @ 13:42
LCD ABS-like Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
As a general comparison for you, ABS-LIKE resin is not as hard/tough as standard resin (82D shore hardness vs 85D), tensile strength is also lower.
Good mechanical strength and rigid-tough, low shrinkage. Low odor
This resin is easy to clean (in isopropal alcohol) and paint.
It has good long-term storage stability.
Compatible with most LCD 3D printers, but specifically formulated for the Flashforge Foto 133 and Foto 8.9
Specifications
Density (g/ml): 1.05 ~ 1.15
Viscosity (cps, 25°)C: 300 ~ 400
Hardness (D): 82 D
Tensile Strength (MPa): 37 Mpa
Elongation @ break (%): 11%
Flexural Modulus (MPa): 2100 Mpa
Flexural Strength (MPa): 71 Mpa
Next >
Related Products:
Buy Now
FlashForge Foto 8.9s LCD Resin 3D Printer - Ex-DEMO
1 only Ex-Demo Foto 8.9s. New FEP Film, 2 spare sheets included. 30 day warranty ONLY
With a 192x120x200mm build volume and 4K LCD screen, the Foto 8.9 is great value for money
Buy Now
FlashForge LCD Resin - Standard - Grey 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Red 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Transparent 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - White 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Black 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Green 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- Grey 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- White 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- Orange/Red 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Copyright 2011-2024 Bilby3D Pty. Ltd.