Use M3D TUFF™ if you intend to 3D print robust engineering prototypes; it was designed to withstand high stress and strain. Once fully post-cured, TUFF™ can be machined, painted or polished for further finishing.

TUFF™ requires post-curing to reach its optimal mechanical properties. We recommend using a 405nm LED Ultra-Violet light to post-cure the model. It is recommended to post-cure for at least 30mins to improve the tensile strength of the resin, but up to 2 hours will further enhance the mechanical properties.

Next >

• Viscosity: 200 – 300 cps @ 25°C (Brookfield RVT)
• Odour: Negligible Characteristic
• Active Solids: 100%
• Shelf Life: 36 months
• UV Cure: 225nm to 420nm
• Layer Height: 10um – 100um
• Cure Speed: Fast with UV LED
• Storage: Dark Cool, Dry place out of direct sunlight
• Wash Up: RESINAWAY® or IPA (Isopropyl Alcohol)




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet