The FLEX100™ has an extremely high level of flexibility so you can 3D print compressible and bendable models.

The thinner the part, the more flexible it will be. FLEX100™ can be used on its own or by mixing with our other resin systems to produce varying degrees of flexibility and firmness. By adding a small amount of FLEX100™ to our other resins would create a less brittle and more durable part. By adding larger amounts, the more flexible it will become.

Remember to use scales to weigh the resins so results can be repeated. We recommend you make 100grams at a time to keep the ratios simple. For example, for a firm, durable resin try 25:75 mix – 25 grams of FLEX100™ to 75 grams of hard resin. For a very flexible version, you could try 90:10 mix 90 grams of FLEX100™ and 10 grams of hard resin.

IMPORTANT

When mixing FLEX100™ with our other resin systems, please ensure that you cure for a long enough time to fully cure the flexible resin. This is a slower curing resin and takes more UV exposure to fully cure. Although the part might look perfectly formed, if it hasn’t been cured for long enough, cracks may appear due to the resin being under cured.

Next >

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

The Viscosity of FLEX100™ is 30-50 cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

APPLICATION

FLEX100™ can be used on its own or by mixing with our Rapid colour range to produce varying degrees of flexibility and firmness. By adding a small amount of FLEX100™ to the Rapid resin would create a less brittle and more durable part. By adding larger amounts, the more flexible it will become. Please ensure that you weigh the products so results can be replicated. Our CMYK pigment set can be added to the mix.



Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet