Available Colors

• Ultracur3D® CK 01 (White)
• Ultracur3D® CK 02 (Yellow)
• Ultracur3D® CK 03 (Cyan)
• Ultracur3D® CK 04 (Magenta)
• Ultracur3D® CK 06 (Black)

Mixing method:

1) Shake the color kits well before use. Pigment dispersions will often show some settling over time
2) Determine the amount of color kit you want to add. You can use the table below as a guideline

Remarks:
• In the examples below, Ultracur3D® ST 80 is used as the clear base resin. Results with other materials will usually be similar, but take into account that if your base resin has a strong background color (e.g. yellow or brown), this may affect the final color
• The table uses weight-based ratio’s. However, the same ratio’s can be used on a volume-base (e.g. using a syringe to add color kit). Liquid densities of both the color kits as well as most available resins are all very similar (around 1.0-1.1 g/ml), so any effects on the final color will be negligible

3) Mix the clear resin with the color kit:

• Option 1: using an external mixer, just mix until the mixture looks homogenous. We have good results with a Silverson L5M-A mixer, at 1500 rpm for 15-30 minutes. Since materials will be exposed to light, it is recommended to do this in a UV-free (orange light) room
• Option 2: Add the required amount of Color kit to your base resin in its original container (bottle) and shake until homogenous

4) Determine appropriate printing parameters (see indications below) and start printing!

Compatibility with other Ultracur3D® 3D-printing resin

The Ultracur3D® CK Line has very good compatibility with the rigid Ultracur3D® materials (Ultracur3D® ST 80, Ultracur3D® ST 45, Ultracur3D® RG 35 and Ultracur3D® RG 50). Compatibility with Ultracur3D® flexible materials (FL / EL – Line) is more difficult and tests are still ongoing.



Next > More Information

Dimensions: 185 x 75 x 75mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.