High-quality, North American made hardware combined with intelligent software allows engineers to achieve high performance parts, in any material, with the touch of a button.

Get consistent part properties and high isotropy across the entire build volume, production runs, and printers.

Open Additive

Configurability is a right, not an upgrade — open materials, open settings, open access to process data.

Seamless Experience

With intelligent software and smart hardware, AON3D delivers a seamless, integrated, and easy user experience.

Reliable Results

Machine learning-driven software and advanced process monitoring deliver reliable, repeatable, and quality-verified parts.

Return on Investmente

Avoid proprietary materials, expensive material licenses, hardware upgrades, and software subscriptions that diminish ROI.



Next >

Technology : Material Extrusion (MEX)
Build Volume : 650 x 450 x 450 mm (XYZ)
Extruders : Dual Independent (Composite-ready)
Print Modes : Single toolhead mode
Layer Height : 0.05 - 1.2 mm
Resolution : X/Y: ± 10 um Z: ± 1.5 um
Chamber Heat Up Time : < 60 min (Ambient to 250 °C)
Chamber Temperature : 250°C
Bed Temperature : 250°C
Nozzle Temperature : 500°C
Nozzle Sizes : 0.2, 0.25, 0.3, 0.4, 0.6 (Standard), 0.8, 1.0, 1.2 mm
Build Platform : Auto-leveling with vacuum chuck
Print Surface Options : CF PEEK, PEI, Garolite, and more. (Reusable sheets or plates)
Max Print Speed : 500 mm/s
Max Travel Speed : 600 mm/s
Max Acceleration : 1 g
Max Build Rate : Up to 100 mm3/s or 360 cm3/hr (Polymer dependent)
Material Format : Open material system, 1.75 mm filament
Compatible Materials : ABS, ASA, Nylon (PA 6, 6/66, 12), PAEK, PC, PEBA, PEEK, PEI (ULTEMtm 9085, 1010), PI, PEKK, PETG, PLA, POM, PP, PPSU, PSU, PVDF, TPE, TPU, and many more.
Carbon fiber, glass fiber, Kevlar®, and ESD safe variants of the above.
Various soluble and breakaway support materials.
Material Storage Capacity : Up to four 2.2 kg reels or two 5kg reels
Material Loading/Changeover e : Fully automated
Error Detection : Filament feed error, jam detection, and runout detection
Material Storage Dewpoint : -25°C
Connectivity : Wi-Fi (Removable), Ethernet, USB port (File upload only)
Control Interface : 12.3 in. LCD touch screen, cloud management
Recommended Slicer : SuperSlicer
Installed Dimensions : 1258 x 870 x 1892 mm (XYZ)
Space Requirements : 2258 x 1470 x 2600 mm (XYZ)
Weight : 650 kg
Supply Voltage : 208-240VAC, 50 A, Single Phase
Emission Filtration : HEPA/Activated Carbon Filter
Compressed Air Requirement : 75-135 psig, minimum flow 0.5 CFM, <50C (122F)
Sensors and Accessible Data : Microstep logging (As-executed motion)
X/Y/Z linear encoders
Nozzle, chamber, and bed thermals
Nozzle force
Optical nozzle inspection camera & automatic XY offset calibration
Filament feed rate
Filament diameter
Filament feed tension/compression
Material storage temperature, humidity, and pressure
Ambient temperature, humidity, and pressure
4K chamber camera (optional)
500°C 0.2, 0.25, 0.3, 0.4, 0.6 (Standard), 0.8, 1.0, 1.2 mm Auto-leveling with vacuum chuck CF PEEK, PEI, Garolite, and more. (Reusable sheets or plates) 500 mm/s 600 mm/s 1 g Up to 100 mm3/s or 360 cm3/hr (Polymer dependent) Open material system, 1.75 mm filament ABS, ASA, Nylon (PA 6, 6/66, 12), PAEK, PC, PEBA, PEEK, PEI (ULTEMtm 9085, 1010), PI, PEKK, PETG, PLA, POM, PP, PPSU, PSU, PVDF, TPE, TPU, and many more. Carbon fiber, glass fiber, Kevlar®, and ESD safe variants of the above. Various soluble and breakaway support materials. Up to four 2.2 kg reels or two 5kg reels Fully automated Filament feed error, jam detection, and runout detection -25°C



Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product