Keep you filament away from dust and moisture with the PolyBox filament storage box - with inbuilt temperature and humidity guage
FeaturesSpecsSupport
PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them.
PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them. PolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture from the air inside the PolyBox™, specifically designed for hygroscopic materials such as PolySmooth™, PVA or Nylon. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm and 2.85mm filament diameters.
Comes with 1.5m of feeder tube (cut in half for 2 spools) to use is desired.
Requires simple assembly (video includes assembly demostration)
Next >
- Desiccant type: Silica gel
- Desiccant specifications: 2*Desiccant sachets - can now be refreshed in a microwave (follow instructions)
- Supported filament spools: 2 spools = 1kg or 1 spool 3kg
- 2 Spools: up to 78mm wide
- 1 Single Spool: up to 172mm wide
- Diameter: Due to the rounded corners, a full width spool cannot take advantage of the full 300mm diameter possible, however thinner width spools are able to make full use of it
- Humidity range: 10-99%
- Accuracy: &plusminus;5%
- Measurement Resolution: 1%
- Response: 10 seconds
- Temperature range: -50~70 °C
- Accuracy: &plusminus;1 °C
- Battery specifications: LR44*1
- Product size: 315(L)*190(W)*310(H)
- Package size: 196(L)*320(W)*320(H)
- Product weight (without desiccants or filament): 1.150kgs
- Package weight: 1.700kgs
Dimensions: 315 x 190 x 310mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Place your spool into the zip lock bag with some of the sachets, to keep your spool dry when not in use; or place in your plastic storage container.
Buy Now
Dry Cabinet - 121 Litre, Analog Hydrometer
Keep your filament dry in this metal cabinet with a controlled humidity range adjustable between 25-55%
Buy Now
Dry Cabinet, 90 Litre with Filament Feed
Print filament while it is still protected in a controlled humidity environment!
Buy Now
Modix Big60 v3 3D Printer Kit with Enclosure
Modix large 3D printers are more powerful and versatile with a 600 x 600 x 660 build volume!
Premium off-the-shelf components designed for high quality and reliability
Designed as a customizable platform, delivered as self assembly kits
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
Makerbot CoPA Nylon + Carbon Fibre, 1.75mm, 500g
Makerbot Nylon (PA 6/66) Carbon Fibre has the highest peak performance in all categories, it is significantly affected by moisture which will reduce both strength and modulus.
Buy Now
Makerbot PVA for Method - 1.75mm - Natural - 450g
Water soluble support material for complex parts
Buy Now
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
Pro PLA Filament - 1.75mm - Blue - 3kg spool
Bilby3D Professional PLA filament in blue. Perfectly wound and humidity resistant for professional results.
Buy Now
Raise3D Premium PVA - 1.75mm filament - 1kg Spool - UNTIL SOLD OUT
Genuine Raise 3D Premium PVA Filament >> NOW REPLACED WITH PVA PLUS PVAP175RP750
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
Pro PLA Filament - 1.75mm - Silver - 3kg spool
Bilby3D Professional PLA filament in silver. Perfectly wound and humidity resistant for professional results.
Buy Now
Raise3D E2 Dual Extruder Printer
An easy-to-use, durable desktop 3D printer ready to increase precisionn standards, scale production, and add a powerful new manufacturing resource
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
Pro PLA Filament - 1.75mm - Black - 3kg spool
Bilby3D Professional PLA filament in black. Perfectly wound and humidity resistant for professional results.
Buy Now
Pro PLA Filament - 1.75mm - White - 3kg spool
Bilby3D Professional PLA filament in white. Perfectly wound and humidity resistant for professional results.
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
FlashForge Guider 2-S (v2 - 2022 Model)
This 2022 update to a solid large 3D printer became much quieter, in addition to a flexible bed And spare bed Tape, Toughend filament drive gear, Toughened nozzle (included in the spare parts pack and not fitted) and improved filter.
It has a user friendly touchsreen and webcam, plus a generous 280 x 250 x 300mm build volume.
All machines come standard with high-temperature extruders (to 300deg).
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
Perth - Belmont, WA
3D Printers
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs