The original is still the best! Worlds First Carbon Fiber PLA filament was kickstarted by ProtoPlant nearly 5 years ago. Others try, but cant match the quality and ease of printing experience afforded by this product.

Protopasta Carbon Fiber PLA is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. CFPLA prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal. Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte black finish. Also has a slight sheen due to the embedded carbon making it very photogenic!

**This filament is slightly more abrasive than standard PLA. Be prepared to replace your nozzle and do 1st layer adjustment after prolonged use or upgrade to a wear resistant nozzle for less maintenance.

Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

In filament form, CFPLA is slightly more brittle than standard PLA, and requires extra care when handling.

Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and/or bowden type machines.

We frequently print using direct-drive systems with 0.4mm nozzles and print as high as 240C, though suggest 0.6mm and 210-230C for the best experience.

Next > More Information

Aprox. Length: 18m

Dimensions: 150x155x10mm


Next >

We have printed a lot of this material using the Makerbot Replicator 2 with the TC coated nozzle.
These are the settings we use:
Extrution temp: 240 degrees
Resolution: Usually at 200 micron. Finer does not tend to be as reliably, and layer adhesion is more poor at 300 micron
Print/travel speed: The default 80 mm per second.
Shells (wall layers): Usually 3 or more
Fill: 15-20 percent fill.
Rafts and Support: Supports work well and can easily be removed in accesible places. We use a rat tail (or jewlery file) to smooth off support contact points. Rafts on the other hand can be very difficlt to remove.
Build surface: Generally we print straight onto cold glass plate
Bilby 3D provides a 1 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet