• Impact Resistance
• 100% Recycled Material

Properties of 3D filaments made of HIPS

The HIPS has a print profile similar to PLA and ABS. It is also recommended to use a fixative. Its finish is very precise. Furthermore, printing can be done using ABS substrates and it offers high impact resistance.

Compatible printers and the most common applications

The HIPS is compatible with most 3D printers. It also dissolves in D-Limonene. The PS filaments by Kimya are used for prototyping printed parts with a fine surface condition.

Points to note

It is only available in a few colors. It also is prone to warping (parts come loose from the plate causing deformation). Lastly, you will also need a washing machine or a tank to dissolve it in the solvent.

Possible alternatives: PLA-based filaments

Next > More Information

Note: Please see the TDS on the support tab for full manufacturers specifications

Print Settings

- Print Speed: 50 mm/s
- Extrusion Temperature: 250°C
- Platform Temperature: 90°C

Spool Size

- Outer Diameter: 200mm
- Width: 55mm
- Inner Diameter (hole): 52mm

Dimensions: 200 x 200 x 55mm


Next >

Bilby 3D provides a 18 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Technical Data Sheet