The applied modifications ensure improved thermal stability of printed parts, increased electrical insulation and higher chemical and water resistance. Due to its properties, Spectrum PC/PTFE filament is a material for a wide range of industrial applications. Materials printed using the PC/PTFE filament can be machined for a perfectly smooth surface. The use of this type of material makes it possible to manufacture parts with relatively complex geometries while maintaining relatively high dimensional accuracy.

To attain the very attractive properties of Spectrum PC/PTFE, as regards the technical aspects, you need to follow the basic storage rules for such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object possible, it is recommended to dry the material prior to work.

Tip: It is recommended to print using a heated chamber.

Applications:

• Manufacturing low friction parts
• Manufacturing parts providing heat, electrical and thermal insulation
• Manufacturing low-load gears and transmission elements
• Manufacturing tools used to assemble components during the production process of end-use parts
• Functional prototyping
• Packaging



Next >

Key Features:

• Low processing shrinkage (linear) approx. 0.6%
• Heat deflection temperature (HDT)- 140°C
• Vicat softening point - 145°C
• Flammability rating UL 94 (3.0mm) - V1
• Electrical resistance 1E12 Ohm
• Static coefficient of friction - 0.18
• Dynamic coefficient of friction - 0.14
• High abrasion resistance
• High mechanical strength
• Very strong lamination of layers

Recommended Print Settings

• Printing temperature: 265-295°C
• Heated bed: necessary
• Heated bed temperature: 95-120°C
• Printing speed: 30-80mm/s
• Enclosed chamber Recommended

Spool Dimensions

• Outer diameter: 200mm
• Width: 55mm
• Inner diameter: 52mm
• Empty spool weight: ± 220g

The filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. The filament is vacuum-packed with a moisture absorber. Whole product is packed in the original, foiled Spectrum Filaments packaging.

VERIFY YOUR SPOOL – the most precise quality control system on the market

Filament for 3D printers is manufactured by the method of free extrusion, which is one of the most difficult processing techniques by extrusion, due to the particularly significant impact of process parameters on product dimensions and material homogenization.

During the production, each 1mm of Spectrum Filament is being continuously measured in 2 axes with ±0.8µm accuracy, which allow obtaining a high-quality final product. To prove this, Spectrum Filaments, as one of the few manufacturers in the world, has introduced the possibility of online presentation, individually for each manufactured spool:
• Diameter on the entire length of the spool
• Mean diameter
• Ovality
• Standard deviation

Precise survey guarantees that Spectrum Filaments products meet rigorous market requirements.

Dimensions: 200 x 200 x 52mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet