When creating the composition, we paid particular attention to reducing the abrasiveness of the glass fibres, which is typical for this type of filling. For this reason, we used functionalised glass fibres with a less aggressive geometry, reducing degradation of the printer nozzle.

Spectrum PCTG GF10 is a technical filament with high stiffness and hardness. Thanks to its extremely high interlayer adhesion and low shrinkage, it allows even intermediate users to execute large prints.

In addition, the glass fibres give the prints a distinctive texture, which, in addition to its undoubted aesthetic qualities, also translates into increased usability. Models made from Spectrum PCTG GF10 can be used wherever increased adhesion, increased durability against cyclic load and chemical resistance are important.

Key features:

• Heat deflection temperature HDT - 76°C
• High stiffness and tensile strength
• Good impact resistance
• High surface quality after printing
• Good corrosion resistance
• Chemical resistance
• Good chemical resistance and electrical and thermal insulation
• High dimensional accuracy of the printed elements

Applications:

• Visual and functional prototyping
• Manufacture of safety devices, housings and covers
• Electrical safety components
• Conceptual models
• Manufacture of parts exposed to chemical agents
• Manufacturing tools and equipment

Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Whole product packed in the original, folied Spectrum Filaments packaging.


Next >

General Information

• Color: White
• Diameter: 1.75mm
• Dimensional tolerance: ± 0.03mm
• Verify your spool - preview of the diameter course on the entire length of the spool: YES
• Density: 1.31 g/cm³
• Net weight: 1000g
• Total weight: 1400g

Recommended print settings

• Printing temperature: 250-270°C
• Heated bed: Necessary
• Heated bed temperature: >50°C
• Printing speed: 30-80mm/s
• Closed chamber: Not necessary

Dimensions of the spool

• Outer diameter 200mm
• Width: 67mm
• Inner diameter: 52mm
• Empty spool weight: ± 250g



Dimensions: 200Ø x 67 mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet