It comes on a plastic spool which has an inner hole of 3cm and and outer diameter of 16cm.
It is for 175mm Extruders
Melting Point 175-230°C
PLA filament is easy to use due it not requiring a heated bed, low shrinkage and much safer to use due to the low and relatively innocuous emissions when heated.
We have tested this on over 10 different types of 1.75mm extruding machines with cold or heated beds such as Makerbots, FlashForge, Dremel, UPs, Printrbots and many more.

Next >

Diameter: 1.75mm (+/- 0.2mm)
Weight: Aprox. 1kg of filament, plus spool and box
Melting Point: 190-240 degC
Soften Point: TBA expected at 70-80 degrees
Abrasive: No
Build Surface: Cold bed on Blue tape or Buildtak

SPOOL SIZE
Type : Plastic
Inner hole: 5.2cm
Outer diameter: 15cm.
Width: 3cm

PACKAGING
Vacuumed in heavy weight plastic, then boxed.

Dimensions: 200 x 200 x 65mm


Next >

Bilby 3D provides a 1 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet