Prices + Stock updated 10 May @ 13:42
Spectrum Carbon PLA is a modified, PLA-based filament blended with carbon fibers which contributes to a considerably higher rigidity, hardness, and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for the pure PLA. The 10% addition of carbon fibre enables you to obtain matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.
Related Products:
Buy Now
Spectrum PLA - Deep Black - 1.75mm - 1kg Spool
Spectrum Premium PLA yields excellent surface quality and detail, producing reliable results. Items printed with Spectrum PLA demonstrate extremely high aesthetic properties due to the layer cohesion even at large inclination angles of item surfaces.
Scan in the unique QR code on each spool to view data on the laser measerment of the filament while it was made!
Buy Now
Spectrum PLA - Deep Black - 1.75mm - 2kg Spool
Spectrum Premium PLA yields excellent surface quality and detail, producing reliable results. Items printed with Spectrum PLA demonstrate extremely high aesthetic properties due to the layer cohesion even at large inclination angles of item surfaces.
Scan in the unique QR code on each spool to view data on the laser measerment of the filament while it was made!
Buy Now
Kimya PETG + Carbon Fibre - 1.75mm - Black - 500g Spool
PETG CARBON has an excellent tensile modulus. PETG is reinforced with carbon fibers, giving it high impact strength
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 750g
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Buy Now
PolyMaker Carbon Fibre reinforced PA6 Nylon, Black, 1.75mm, 500g
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Copyright 2011-2024 Bilby3D Pty. Ltd.