Prices + Stock updated 10 May @ 13:42
This tube is an improvement over the stock MakerBot Replicator 1 and MakerBot Replicator 2 thermal barrier tube. Also used on many other types of 3D Printers
It is made from Stainless Steel and plated with TwinClad XT coating.
TwinClad XT is a very low friction Electroless Nickel composite coating, often used in injection molding because of it release properties. This high lubricity plating will prevent clogging in the critical transition zone of hotend, where filament liquidizes. It is also very hard and corrosion resistant.
Great for high abrasion filaments like Carbon Fiber, Metal filled, Aluminates, etc.
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
0.4mm Nozzle - M6 Thread for MK8 Extruders - Twin Clad Coated
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
Buy Now
0.6mm Nozzle - M6 Thread for MK8 Extruders - Wear Resistant TwinClad Coating
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
Buy Now
0.4mm Nozzle - M6 Thread - Wear Resistant Twin Clad Coating - 3mm Filament
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
Buy Now
0.2mm Nozzle - M6 Thread for MK8 Extruder - Twin Clad Coated - 1.75mm filament
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
Copyright 2011-2024 Bilby3D Pty. Ltd.