Prices + Stock updated 10 May @ 13:42
Micro Switch, SPDT, 5A, Lever
These microswitches are great for machine endstops
They have 3 solder lugs, Normally Closed, Normally Open and Common.
9.5mm between the mounting holes, which take a M2.5 bolt.
Equivalent to Omron SS-5GL used on Ultimakers
Next >
- Max. Voltage: 3A at 250VAC
- Max. Current: 5A at 125VDC
- Contact Resistance: <= 20mOhms
- Insultation Resistance: >=100MOhms
- Operational Life: 100,000 cycles
- Operational Range: 0.5 - 1.1mm
- Operational Tolerance: <= 0.3mm
- Operation Pressure: 0.3 - 1.2N
Dimensions: 22x19x6
Next >
Related Products:
Buy Now
Micro Switch, SPDT, 5A, Lever Roller - UNTIL SOLD OUT
These roller microswitches are great for machine endstops.
Buy Now
Endstop Switch board with 3 pins, Set of 3 - UNTIL SOLD OUT
Switches are rated to 1A at 125V AC
3 pins are marked:
SIG (Signal)
GND (Ground)
VCC (Control Voltage)
Buy Now
Hall Effect Endstop - 3 pin with 2 magnets
These amazing Hall Effect endstops have no moving parts and yet are the most accurate endstops we have found. Mount one of the supplied magnets on your axis and as it gets close to the endstop it will be triggered at a consistent spot every time.
Buy Now
Endstop Switch board with 4 pins
4 pin endstop with cable - individual plugs for the motherboard to work with a variety of different connectors
Buy Now
Cables - Two wire with connector - 70cm
These cables have two wires, red and black, and are terminated to the correct connectors to match the endstop pins on the RAMPS board.
Copyright 2011-2024 Bilby3D Pty. Ltd.