Prices + Stock updated 22 Jul @ 17:35
0.4mm Nozzle - M6 Thread - Wear Resistant Twin Clad Coating - 3mm Filament
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
Features
Specs
Support
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament. TwinClad XT is a nickel composite coating for very low frction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel
This is dimensioned the same as our standard nozzle, as used on the Makerbot MK8 extruders.
ALWAYS run preheat before changing nozzles to avoid stripped threads.
Is is compatible with older Ultimaker and FlashForge Creator, as well as Wanhao and CTC
Next >
Hole: 0.4mm hole.
Thread: M6, 5mm Long
Total Length: 13mm.
Head width: 7mm
Base: Flat at screw/thread end
Tip: may have a slight flatened area
Filament Size: suitable for 2.85/3mm filament.
Alternative: 1.75mm filament with 2mm Inner Diameter + 3mm outer diameter PTFE tube
Coating: TwinClad Coated
Product Dimensions: 13 x 7 x 7mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
Stainless Steel Barrel with TwinCladXT Coating
This tube is an improvement over the stock MakerBot Replicator 1 and MakerBot Replicator 2 thermal barrier tube. Also used on many other types of 3D Printers
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Copyright 2011-2024 Bilby3D Pty. Ltd.