Prices + Stock updated 10 May @ 13:42
Spectrum Nylon, PA6 Carbon Fibre, Black, 1.75mm, 1kg Spool - UNTIL SOLD OUT
This filament has the specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and PVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Key features
- Eexceptionally low processing (linear) shrinkage of 0.1 %
- High temperature and abrasion resistance
- Easy separation of the object from the bed
- High mechanical strength
- Chemical resistance to lubricants and oils
- Wide range of applications
- Very robust lamination of layers
- High creep resistance, high hardness and rigidity of the printed items
- Very wide temperature range for prolonged operation as well as a very high temperature up to 180°C for short-time operation
Applications
Production of gear wheels and racks, sweep-off gears and guide rolls operated in elevated temperatures up to 150°C on a prolonged basis and up to 180°C on a short-time basis
All types of ring and plate seals with an increased chemical and corrosion resistance
End-use parts
Tooling
Functional prototyping
Industrial modelling
Next >
Related Products:
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 750g
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Buy Now
Spectrum - 1.75mm - Carbon Fibre Mix pack - 5x250g spools
Get a range of Spectrum Carbon Fibre Reinforced filament with this Mix pack of 5 mini spools.
The included filament are: PLA Carbon, PETG Carbo, ASA-X CF10, PA6 Low Warp CF15
Buy Now
PolyMaker Carbon Fibre Reinforced PA6+12 Nylon, 1.75mm, 500g
PolyMide™ PA612-CF is a carbon fiber reinforced nylon filament based on a copolymer of Nylon 6 and Nylon 12. Featuring 15% chopped carbon fibers by weight, this filament has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials.
Buy Now
PolyMaker Carbon Fibre reinforced PA6 Nylon, Black, 1.75mm, 500g
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Copyright 2011-2024 Bilby3D Pty. Ltd.