Transfer your platform

Wash 15 can accommodate parts up to 300 x 275 x 120mm, capable of fitting a partial platform from the LC Dental.

Reduce downtime, slash costs

Wash 15 can perform 140 clean cycles before changing the cleaner fluid.

15L Capacity

Photocentric Cleaner volume to fill the wash unit.



Photocentric say :We generally say that the resin cleaner runs for 300 print cycles, but it depends. The resin cleaner will be effective for longer when washing smaller, solid parts in the same resin than when washing larger, hollowed parts in a variety of resins.



IMPORTANT: to use the wash with prints still on the OPUS platform you will need to also purchase the Bracket and lid (image 3) sold separately

Update 15 December 2021
Since the time of purchasing from Photocentric your Wash Unit (15Lt) and Cure M+ customer in use experience have resulted in updates to the descriptions/specifications on these products as follows.

Wash 15: to use the wash with prints still on the OPUS platform you require a Bracket and lid that Photocentric now sell separately. We are seeking clarification on the impact on the max z height of your print as a result. If you submerge the platform (with prints pointing upwards, we believe the max height may only be 150mm, and will clarify asap.

Cure M+ : The internal size supplied assumes you are curing off the platform. If you use the platform bracket and cure on the Optus platform you reduce usable space by 90mm. As a result you can not cure items produced at the max height of the opus.

In conclusion: Opus print - to Wash 15 - to Cure M+ workflow was tested by Photocentric through company case studies that did not utilising the full print height of the Opus. This workflow is still valid and workable in those scenarios however it is apparent that where Z height of build exceeds 150mm this workflow needs to be adjusted to suit. We apologise for this and are examining the issue.



Next > More Information

Dimensions: 460x420x350


Next >

Bilby 3D provides a 12 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket