A simple and versatile solution

Equally at home, in a dental laboratory or engineering workshop, its intuitive and simple operation makes LC Opus perfect for beginners and experienced users alike.

Consistent performance when you need it most

With its rugged construction the LC Opus has been designed to provide reliable and repeatable performance time and time again.

Start printing in minutes

Delivered pre-calibrated, LC Opus is ready to print straight out of the box. With simplified homing and a newly developed vat with assisted cleaning mode, LC Opus is your trusted production partner.

Stay ahead of the competition

The speed and reliability of the LC Opus, combined with its low running costs ensure you will be leading the way where it matters.

Rapid curing speeds

Incredibly fast cure speed of 2 seconds per layer* at 50µm layer thickness enabling large volumes of parts to be printed quickly, accurately and consistently.
*Dependent on resin

Patented Technology

With an impressive build volume of 310 x 174 x 220mm and Photocentric’s patented Peel Release ‘Vat-Lift’ technology large surface areas can be printed reliably and with ease.

Robust and Reliable

Meticulous attention to detail and the selection of precision engineered mechanical components deliever outstanding performance.

Update 15 December 2021
Since the time of purchasing from Photocentric your Wash Unit (15Lt) and Cure M+ customer in use experience have resulted in updates to the descriptions/specifications on these products as follows.

Wash 15: to use the wash with prints still on the OPUS platform you require a Bracket and lid that Photocentric now sell separately. We are seeking clarification on the impact on the max z height of your print as a result. If you submerge the platform (with prints pointing upwards, we believe the max height may only be 150mm, and will clarify asap.

Cure M+ : The internal size supplied assumes you are curing off the platform. If you use the platform bracket and cure on the Optus platform you reduce usable space by 90mm. As a result you can not cure items produced at the max height of the opus.

In conclusion: Opus print - to Wash 15 - to Cure M+ workflow was tested by Photocentric through company case studies that did not utilising the full print height of the Opus. This workflow is still valid and workable in those scenarios however it is apparent that where Z height of build exceeds 150mm this workflow needs to be adjusted to suit. We apologise for this and are examining the issue.



Next > More Information

Capabilities

• Printing Type: UV Polymer Resin Printing
• Build Volume: 310 x 174 x 220mm
• Layer Heights: 25, 50 or 100 microns
• Print Speed: 18mm per hour
• Curing Speed: 2 Seconds/layer @ 50µm (dependant on resin)
• Resolution: XY resolution of 81µm provides scanned data accuracy of >=95% at <100µm and >=70% at <50 µm
• Photocentric’s patented peel release technology - ‘Vat-Lift’
• Light Type: 410 nm (UV)

Machine

• Machine Weight: 38kg
• Machine Size: 615 x 491 x 419 mm
• Spacing Requirement: at least 150mm on all sides, and 200mm between machines

Connections

• Power Input: 3A 240V AC
• USB: Host for USB Drive OR supplied Wifi dongle
• Ethernet: RJ45 socket

Software

Includes - Photocentric Studio, Perpetual License for 2 devices
Minimum Computer Requirements:
• Operating System Windows 7, 8 or 10
• Minimum 2.0 Ghz processor speed 2 cores. Recommended 4 cores
• GPU capable of opening OpenGL version 3.0 or higher
• NET framework version 4.0
• 64bit system: recommended 4GB
• 32bit system: recommended 2GB
Built-In PrintFlow Printer Controller:
• Version 0.66
• USB Connection
• Storage Capacity: 11Gb

Please see Support Tab for full Technical Specifications

Dimensions: 615 x 491 x 419 mm


Next >

Bilby 3D provides a 12 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket
Technical Data Sheet