Prices + Stock updated 24 Apr @ 16:30
Ultrafuse BVOH, ideal water-soluble support material for your 3D print.
Unlike PVA, BVOH is highly durable against moisture in the air.
Good adhesion to ABS and PLA
Printing complex designs may only be possible with temporary support structures. Dissolvable support material saves post-processing time, and allows supports to be removed from locations that may otherwise be difficult or impossible
Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with higher water temperatures.
It offers great compatibility to a variety of materials including: PLA, PLA PRO1, ABS, ABS Fusion+, PA and PAHT CF15.
customers are testing it with ASA
IMPORTANT! Store this monofilament in a sealed bag, container or dry cabinet to prevent moisture uptake.
Next >
More Information
- Butenediol Vinyl Alcohol Co-polymer (BVOH) filament
- BASF Ultrafuse BVOH - 1.75mm - 350g
- Colour: Natural Yellow
- Diameter: 1.75mm
- Weight: 350g
Dimensions: 215x220x70
Next >
Recommended 3D-Print processing parameters
Nozzle Temperature: 190 – 210 °C / 374 – 410 °F
Build Chamber Temperature: not required
Bed temperature: 60 – 100 °C / 140 – 212 °F
Bed Material: Glass
Nozzle Diameter: = 0.4 mm
Print Speed 30-60mm/s
Drying Recommendations:
Drying recommendations to ensure printability; 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
Related Products:
Buy Now
BASF UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Ultrafuse BVOH, ideal water-soluble support material for your 3D print.
Unlike PVA, BVOH is highly durable against moisture in the air.
Good adhesion to ABS and PLA
Buy Now
BASF UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 2kg Spool
Ultrafuse BVOH, ideal water-soluble support material for your 3D print.
Unlike PVA, BVOH is highly durable against moisture in the air.
Good adhesion to ABS and PLA
Buy Now
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
Copyright 2011-2024 Bilby3D Pty. Ltd.