Printing complex designs may only be possible with temporary support structures. Dissolvable support material saves post-processing time, and allows supports to be removed from locations that may otherwise be difficult or impossible
Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with higher water temperatures.
It offers great compatibility to a variety of materials including: PLA, PLA PRO1, ABS, ABS Fusion+, PA and PAHT CF15.
customers are testing it with ASA

IMPORTANT! Store this monofilament in a sealed bag, container or dry cabinet to prevent moisture uptake.

Next > More Information

- Butenediol Vinyl Alcohol Co-polymer (BVOH) filament
- BASF Ultrafuse BVOH - 1.75mm - 350g
- Colour: Natural Yellow
- Diameter: 1.75mm
- Weight: 350g


Dimensions: 214x216x65mm


Next >

Recommended 3D-Print processing parameters

Nozzle Temperature: 190 – 210 °C / 374 – 410 °F
Build Chamber Temperature: not required
Bed temperature: 60 – 100 °C / 140 – 212 °F
Bed Material: Glass
Nozzle Diameter: = 0.4 mm
Print Speed 30-60mm/s


Drying Recommendations:
Drying recommendations to ensure printability; 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet