Spectrum Nylon PA6 Low Warp advantages:

• Very low processing shrinkage 0.3%
• High temperature resistance (upto 150°C for short periods)
• Easy separation of the object from the table
• Resistance to abrasion
• A wide range of applications
• Chemical resistance to greases and oils
• High mechanical strength
• Very strong bonding of layers

Poliamide Low Warp is an extremely durable construction material based on polycaprolactam improved with admixtures to reduce the high shrinkage inherent to the processing of such materials. A major feature of the polyamide is its increased mechanical strength as compared to other plastics.

The material also features exceptional thermal properties, chemical resistance and a relatively high resistance to corrosion stimulators. Poliamide Low Warp belongs to the few materials with low processing shrinkage, approx. 0.3%.

To attain the very attractive properties of Poliamide Low Warp, as regards the technical aspects, you need to follow the basic storage rules for such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object possible, it is recommended to dry the material prior to work.

Next >

- Color: Natural
- Diameter: 1.75mm
- Dimensional tolerance: ± 0.05mm
- Printing temperature: 250-270°C
- Heated bed: 85-100°C
- Net weight: 500g
- Total weight: 800g

Spool Dimensions:
- External Diameter – 20cm
- Internal Diameter - 52mm
- Width 5.2cm


Dimensions: 200 x 200 x 52mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet