Please Note: This is an expert level filament. It requires much experience, and a hig build chamber temperature to acheive good results.

ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.

Print ThermaX™ PEEK parts with Gearbox™ HT2 High-Temp 3D Printer. Check it out HERE.

Product Attributes Include

• Glass Transition Temp (Tg) of 143°C
• Melt Temp (Tm) of 343°C
• Inherent flame resistance (UL94 V-0)
• Outstanding mechanical, thermal, and chemical resistance
• Continuous Use Temperature (CUT) of 260°C, higher for short duration
• Excellent resistance to a broad range of chemicals, such as those used in the oil/gas, automotive, aerospace, industrial, and chemical processing industries

Filament Specifications

• Diameter: 1.75mm (+/- 0.05mm)
• Colors: Natural/Tan
• Larger reel quantities available upon request

Recommended Print Conditions

• Extruder Temp: 375 – 410°C
• Bed Temp: 130 – 145°C
• Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
• Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
• Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
• Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE

Next >

- Spool Outer Diameter: 200mm
- Spool Width: 76mm
- Spool Hole Diameter: 50mm

Recommended Print Conditions

• Extruder Temp: 375 – 410°C
• Bed Temp: 130 – 145°C
• Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
• Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
• Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
• Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE

Dimensions: 200 x 200 x 50mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product