This high temperature filament will not print on most machines. Your 3D printer needs to be capable of printing at 360-400°C

• Heat Resistance (Continuous Use Temperature to 150°C)
• Abrasion Resistance
• Chemical Resistance
• Flame Retardant - (UL94 V0)

Next > More Information

Note: Please see the TDS on the support tab for full manufacturers specifications

Print Settings

- Print Speed: 20-40 mm/s
- Extrusion Temperature: 360-400°C
- Platform Temperature: 110-170°C

Performance

- Outstanding high temperature performance - continuous use temperature 250 – 260°C, short term exposure up to 300°C
- Very high stiffness, tensile & compressive strength, impact resistance
- Excellent combustion resistance properties - inherently flame retardant, low level of smoke generation
- Low smoke toxicity
- Resistant to virtually all organic and inorganic chemicals (only sensitive to very agressive reagents like fuming sulfuric and nitric acid, methylene chloride)
- High dielectric strength - good insulating properties
- High breakdown voltage
- Tremendous barrier properties (CO2, H2S...etc.)
- Outstanding control of wear-rate and COF (coefficient of friction)

Spool Size

- Outer Diameter: 200mm
- Width: 55mm
- Inner Diameter (hole): 52mm

Dimensions: 200 x 200 x 55mm


Next >

Bilby 3D provides a 18 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Technical Data Sheet